We're Hiring

Click Here To Apply

Articles:

Restore Your Get-Up-and-Go (Fuel and Air Induction Cleaning)

You may have heard the old saying, "My get-up-and-go got up and went." If your vehicle's engine's fuel economy is noticeably worse, your engine is idling roughly or stalling or your vehicle's acceleration isn't what it used to be, ask your service advisor if you might need your vehicle's fuel and air induction systems cleaned. As the hours pile up on your engine, carbon deposits can build up.  It's not unusual for some of the impurities and additives in fuel to leave behind a black residue that eventually will negatively affect your fuel economy and performance. Maybe you're noticing your engine is harder to start, you hear knocking or pinging in your engine and your vehicle just doesn't have the pep it used to. While it's a sophisticated process with a lot of components, a gasoline engine essentially produces power by drawing in air from the outside and mixing it with fuel in the cylinders where this blend of fuel and air is ignited by spark plugs in synchronized explosions. The ... read more

Categories:

Fuel Economy

Oil's Well That Ends Well (Oil Change Grades and Weight)

Changing your oil regularly is one of the most important things you can do to keep your vehicle running well.  And knowing the right type of oil to use is also very important.  Engine oil is classified by weight, but it doesn't refer to how much the oil would weigh if you put it on a scale.  It refers to viscosity, or how easily the oil flows through the engine.  Most engines operate normally at around 210°F/99°C.  The viscosity, or weight, is assigned a number by how well it flows at that temperature.  The lower the number, the more freely it flows.  Most vehicle engines use what's called a multigrade oil which behaves differently in different temperatures. Multigrade oils have a "W" in their viscosity number that you may have seen on a bottle of oil, something like 5W30.  The W stands for winter and shows how freely it flows in colder temperatures. That means a 5W30 oil will behave like a 5 weight oil in lower temperatures (less viscous ... read more

Categories:

Oil Change

Shifty Letters PRNDL (Transmission)

You probably figured out those shifty letters.  They're what you see on your automatic transmission shifter and stand for Park, Reverse, Neutral, Drive and Low.  Your automatic transmission is one of the great automotive inventions; here are some ways you can keep yours working well. Maintain your transmission regularly.  A technician will check your transmission fluid's level and even its appearance and smell.  If it's dark or has an unusual odor, that could be a sign of trouble. Change from one transmission direction gear into another only when your vehicle is stopped.  So many drivers want to switch from Reverse to Drive quickly or the other way around.  If you do that when the vehicle is moving, you can damage your automatic transmission. Keep your vehicle's cooling system in top shape.  What does the cooling system have to do with the transmission? It helps keep the transmission fluid from overheating.  Follow the manufacturer's recommendati ... read more

Categories:

Transmission

More than Pads and Rotors (Brake Caliper Replacement)

You might be familiar with brake pads and rotors, two components of your vehicle's brakes that have to be regularly serviced.  Here's another important component of your brakes: the calipers. Calipers are used in disc brakes, the type of brakes now found in most recently manufactured vehicles.  A caliper is the part of the brakes that squeezes the brake pads against the discs, or rotors, which turn with your wheels.  There are different kinds of calipers, but the basic principle is the same.  You press down the pedal, brake fluid activates a piston or pistons that squeeze the brake pads against the disc and the friction slows down your vehicle. While modern vehicles have a warning system to let you know it's time to get your brakes checked, your brake light usually goes on when your fluid level is low or your fluid pressure is low.  But you may have to look out for signals your calipers are the problem.  If your vehicle pulls to one side when you brake, th ... read more

Categories:

Brakes

All Lined Up (Alignment Inspection)

When you head down a straight road, does your vehicle pull to one side?  Do you feel vibration in any of the wheels? If you've noticed any of these things, it's probably time for you to get your wheel alignment checked. When your vehicle left the factory, its wheels were parallel to each other and perpendicular to the ground.  That maximizes traction for good steering and braking. Every time you take your vehicle on the road, normal wear and tear will affect your alignment. Hit a bump, a pothole or a curb and all those little knocks will add up Bad alignment not only can cause your steering wheel to pull unevenly, it can also wear your tires out a lot faster than they should. In fact, if you look at your tires and see one side of the tread is a lot smoother than the other, it could be another sign of bad alignment. Since different problems can cause similar symptoms, the first thing our trained technician will do is test drive your vehicle. Then, they'll check the front end a ... read more

Categories:

Alignment

Read a Good Tire Lately? (Tire Wear)

There's lots of good information to read in books and online.  You might not know that you can also "read" your tires and learn a lot about what shape they're in and if they are in need of attention. It's important to know how your tires are doing because a tire failure can be very dangerous to you, your passengers and others on the road near you. You read your tire by looking at the surface that rides on the road, where the tread is.  Check out the outer and inner edges.  If you notice there's more wear on the inner or outer edge than on the rest of the tread, your vehicle could be out of alignment.  Wear on an inner or outer edge could mean your wheels are leaning too much to one side.  When you see this, visit our service center soon to have the alignment checked. What about if both edges are worn? That could be a sign that you don't have enough air in that tire.  In an underinflated tire, the middle is not contacting the road surface as much as the edg ... read more

Categories:

Tires

A Hot Mess (AC System-Compresser)

Air conditioning used to be a real luxury in a vehicle, but now it's standard in most.  Your vehicle's air conditioning system is built to last a pretty long time, but like anything mechanical, sometimes it fails.  It helps to know a little about how the A/C works. There's a compressor that pressurizes the refrigerant (you probably recognize the term Freon).  That makes it hotter, so it then goes through a condenser that cools it off.  Then another component takes out impurities and humidity before the Freon goes to a device that makes it lose pressure before it goes to the evaporator.  That's where it gets colder and takes the humidity out of the air. Then your vehicle's ventilation system blows air over the evaporator, cooling the cabin air that gives you such relief on a hot day. Of all these parts, one that does a lot of work is the compressor.  It has to compress that refrigerant and circulate it through the system.  It turns on and off several t ... read more

Categories:

Air Conditioning

Steering You Right (Power Steering Signs of Problems)

Nearly every modern vehicle on the road today has power steering, a wonderful invention that makes steering take far less effort than it did in the "good old days."  Today, we take our steering for granted: until something goes wrong, that is. Most power steering these days is rack-and-pinion, the rack being a metal bar between the front wheels with notches in it and the pinion being a gear whose teeth fits into those notches.  Adding power assist makes it easy to turn. That assist comes in the form of hydraulic fluid that is pressurized by a pump powered by the engine, an electric motor that adds a power assist or a system that uses both an electric motor and hydraulic fluid. Your vehicle usually gives you a heads up that something is going wrong with its steering. Here are a few signs to look for: A humming, whirring, rubbing or grinding sound coming from you engine compartment when you turn. Signs of hydraulic fluid leaking, such as wet spots under your vehicle. The smell ... read more

Categories:

Steering

The Light Many Drivers Fear (Check Engine Light)

Ask just about any driver about one thing they fear seeing inside their vehicle and they'll say it's the Check Engine light coming on. You know, that little light on your instrument panel that is in the shape of a vehicle engine, often accompanied by the words Check, Check Engine, Check Engine Service, or Service Engine Soon. There are so many different reasons that light shows up, from something as simple as a loose gas cap to a more serious problem that requires immediate attention.  The Check Engine light comes on because a component of your vehicle's onboard diagnostics system is telling you something isn't operating normally. Your vehicle has a lot of sensors built in, all tied together by computers.  When the sensors are showing that things somewhere aren't functioning the way they should be, they alert the vehicle's diagnostic computers and tell you something's amiss. The simple rule is if the Check Engine light is on steadily, it's so ... read more

To Fix or Not To Fix (Tire Repair)

You know that sinking feeling when you realize one of your tires has a problem.  It may be making an odd noise or behaving oddly when you're driving.  You may hit a pothole or curb and one suddenly goes flat.  Or you may head back to your vehicle and discover it has one tire deflated without a clue of what must have happened to it. With a lot of different tires hitting the streets these days, the issue of whether to have a tire repaired or replaced can be tricky, and we strongly recommend you have a trained technician help you make that decision.  One of the most common causes of flat tires is picking up a screw or nail in the tread area.  Many of those can be patched and plugged if the puncture isn't more than ¼ inch/6 mm in diameter. Most tires can handle two of this type of repair, but any more and you should buy a new tire.  If there's a puncture or bulge in the sidewall or shoulder, the rule of thumb is it's not repairable.  The sidewall d ... read more

Categories:

Tires
Having Trouble Finding us?
Get Directions
Jack Dane Auto Service is committed to ensuring effective communication and digital accessibility to all users. We are continually improving the user experience for everyone, and apply the relevant accessibility standards to achieve these goals. We welcome your feedback. Please call Sacramento (Downtown) (916) 442-7139, Rocklin (916) 934-5200 if you have any issues in accessing any area of our website.