Informational Videos

For Brakes' Sake (Brake Rotor Service in Sacramento)

2018-09-16 10:30:05

Think of how much abuse your brakes take. Day in and day out, they stop your vehicle when it's going fast and when it's going slow. Maybe your vehicle has been vibrating when you brake, or maybe it seems like your stopping distance is a little bit longer than it used to be.

Then it's time to get your brakes checked out. After all, you have to be able to stop if you want to be safe. Nearly all newer vehicles have disc brakes on the front, and many have that type of brake on all four wheels. That makes it likely you'll be getting disc brakes fixed at some time in your vehicle's lifetime.

Knowing how disc brakes work is as easy as riding a bicycle. If your bike had hand brakes, you'll probably remember a mechanism that squeezed a couple of pads on each side of your bicycle wheel when you applied the brakes. Disc brakes are similar; but instead of the bike wheel, there's a metal disc instead. If that disc is warped or has irregularities in it, it's going to vibrate.

It used to be that rotors were thick, and when they warped, a technician could "turn" them to scrape off a layer of metal so their sides were straight again. The latest vehicles are using thinner, lighter rotors with a slightly different construction. Now, it's likely that rotors that are resurfaced this way will not have enough metal left to work safely. In fact, some manufacturers advise only replacing rotors that are worn out.

Newer designs have reduced rotor prices, and in many cases, the labor cost of turning the rotors is higher than buying new. There are times, though, where your rotors can be resurfaced and still meet manufacturer specifications.

If you have a rotor replaced on one side of your vehicle, it might be a good idea to replace rotors on the other side, too.

Maybe you're looking for the new rotors to last longer than the ones that were on there. New technologies can offer a longer lifespan in a premium rotor. Armed with knowing the type of driving you do, you and your Made In America Made In Japan service advisor can make the best decision on which direction you want to go with your new brakes.

Made In America Made In Japan
1200 I St
Sacramento, California 95814
916-442-3287

Give me a Brake (Light)!

2018-08-19 07:21:05

If that little brake warning light pops up on your dash, do you know what it means? Well, if you said no, you wouldn't be alone. You know it has something to do with your brakes, but exactly what? You're not sure. One of the reasons is that it could mean a lot of different things.

It could be something simple, like you put your parking brake on and forgot to take it off. Easy fix, you're on the road in seconds.

Or, it could mean there's something wrong with your anti-lock brake system. That is a pretty complex symphony of speed sensors, computers and wiring, and sometimes things get a little out of whack. You could have a defective sensor or some wiring may have gotten damaged or come loose. A trained technician at Made In America Made In Japan with special equipment can sort it all out.

It's also possible you have low brake fluid. That could be caused by a number of things. One simple reason is that your brake pads have worn down. Replacing them could solve the problem. Another possibility is that you have a leak in your brake system. That could be serious. If your brake fluid level gets really low, your stopping power goes down along with it, and a vehicle that can't stop is a safety hazard to you and others on the road.

Of all the warning lights on your instrument panel, pay attention to the brake warning light. If it comes on, come on over to Made In America Made In Japan very, very soon. A vehicle is great when it's moving. But if it can't stop, well, that is a disaster waiting to happen.

We’d love to hear from you. Let us know if you have any questions.

Made In America Made In Japan
1200 I St
Sacramento, California 95814
916-442-3287

If You Are Using A Screen Reader And Are Having Problems Using This Website, please call Made in America, Made in Japan (916) 442-7139 For Assistance.