Rocklin and Sacramento Auto Repair

So you love your job, and your family life is great. Congratulations! You have achieved balance. But can you say the same for your wheels? Sacramento drivers can tell if their tires are out of balance by vibrations at higher speeds on California roads. If one of the front tires is out, you feel the vibration in the steering wheel. If it's a back tire, you'll feel the vibration in your seat.Tires and wheels are pretty heavy. When a tire is mounted on a wheel at Made In America Made In Japan, it is usually not perfectly balanced. So the technician will spin the tire on a machine to determine where it's too heavy. He will then place weights on the wheels in strategic locations to balance it out. When a tire is out of balance, it actually bounces down the road instead of rolling smoothly. Since the average size tire rotates at about 850 revolutions per minute at 60 mph/97 kph, it is actually slamming into the pavement 14 times a second. That's where you get your vibration.Most people in S ... read more

Do you ever shop for shoes in one of our Sacramento area shoe stores?When buying a running shoe, is quality important?Does durability matter as long as the shoes look fabulous?Would you rather have one pair of long lasting shoes or two pair of lower quality shoes at the same price?Is the warranty important when buying tires?When you choose new tires in Sacramento, what's the most important factor for you? Give us a call at Made In America Made In Japan at 916-442-3287 for tire recommendations. You know, buying tires in Sacramento is a big deal. It's a big ticket item so you know you'll be spending a lot. You're not only concerned about the price, but you want to know that it'll be a long time before you need to buy new tires again.And of course there's the safety aspect as well. The tires do a lot of work – they carry the weight of the vehicle and you and your passengers. They need to be up to the task ... read more

  Hey Sacramento area drivers, are your tires worn out? What is the standard for our California streets? How can you tell on your vehicle?While there may be legal requirements for the Sacramento area, there are safety concerns that go beyond meeting minimum replacement mandates.Two-thirty-seconds of an inch is the depth of the tire tread wear indicator bars that US law has required to be molded across all tires since August 1, 1968. When tires are worn so that this bar is visible, there's just 2/32 of an inch – 1.6 millimeters – of tread left. It's that level of wear that's been called into question recently.We're referring to the tread depth on a tire, it can't move surface water out of the way and you start to hydroplane.In a safety study, a section of a test track was flooded with a thin layer of water. If you laid a dime on the track, the water would be deep enough to surround the coin, but not enough to cover it.A car and a full-sized pick-up accelerated ... read more